CDAI series
CDAI series pressure transducer are equipped in a 2, 3 or 4 wired amplifier.
It means that the signal of the analogue output may be processed directly e.g. without amplifying. The amplifier is integrated with the main converter and provides an output signal in range 0-20 mA, 4-20 mA or 0-10 V and 2-10 V (4-wired). 2-wire sensor is supplied with a 4-20 mA signal.
Technical data
| Pressure range | 0-100 to 0-1500 bar |
| Total measurement error in % of maximum indication | ±0.5 |
| Accuracy of indications in % | ±0.2 |
| Range of indications | Unlimited |
| Maximum overload of the rated value | 2x measuring range |
| Membrane material | Titanium nitride 1.4541 |
| Resistance of tensiometric sensor | 350 Ohm DMS |
| Output signal | 0-10 V lub 4-20 mA |
| Power supply | 19-32 VDC |
| Calibration point in % of the range | 80 |
| Insulation resistance | 1000 MOhm at 50 VDC |
| Maximum temp. at membrane | 410°C |
| Max. temp. at electronic part | 85°C |
| Max. allowed mounting torque | 1/2″-20UNF-2A = 5 Nm M18 x 1.5 = 10 Nm |
Special features
- Standard mercury-free sensors
- Integrated with the 2,3 or 4-wired amplifier
- Accuracy better than 0.5%
- Good stability and repeatability
- Longlife design
- Available with mercury and mercury-free
- Elastic or hard capillary available
- Membrane made of titanium nitrides coating
- Electromagnetic compatibility
- Sensivity 2 mV/V and 3,33 mV/V
- Pressure measurement range 100/200/350/500/600/700/1000 bar
- Working temperature 30-390°C
- Max energy supply 10 VDC
- 1:1 substitute to transducer available on market
- Perfect price for the offered quality
Dimensions
| D1 | D2 | D3 | D4 | D5 | A | B | C | SW |
|---|---|---|---|---|---|---|---|---|
| M18 x 1.5 | 10 | 16 | 16 | 16 | 6 | 14 | 20 | 19 |
| 1/2-20UNF-2A | 7.8 | 10.5 | 10.5 | 12.5 | 5.6 | 10.8 | 17 | 17/19 |
Select parameters.
Your code is:
CDAIX00 –XX–XXX–X–X