Bagsik Sp. z o.o. Sp.k.

DMV 5000 series

Amplifier and pressure gauge DMV5000 is based on the microprocessor construction and it is very easy to operate

It is an amplifier for material flow pressure controlling converters. Settings assure the conversion 3,33 mV signal in the output connection. Device has max. 4 (any) options of alarm output and one analogue signal of 0-5 V, 0-10 V, 0-20 mA or 4-20 mA. High value of the memory, easy operation through sensible touch keyboard and the extreme durability assure satisfaction and easy use. The unit may be protected against the non-authorised use thanks to software settings. The unit may be protected against the non-authorized usage.

Technical data

ModelFront cover
Dimensions96 x 48 x 80 casing – contains terminal block – with snaps – plastic hooks up to 50 mm thick walls. PC/ABS blend material, black, weight about 0,450 kg. Required notch size: 92 mm x 46 mm.
Display7-segment LED diode, 14mm high
Insulation classFront IP 54, connections IP 00
Accuracy±0,1% of measurement. ±1 digit of temperature accuracy 0 50 ppm/K
Inputresistance – Wheatstone 350 Ohm bridge
Sensor power supply±5 VDC
Power supply voltage10 VDC power supply of the converter
Sensitivity3.3 mV/V
Analog outputyes
Calibration range in %80
Range0 – 9999 bar
Support readings24 VDC*
115 VAC 48-62 Hz*
230 VAC 48-62 Hz
Power supply powerPower supply 230 V